You Should Install Magnetic Flooring for Your Next Home Renovation

You Should Install Magnetic Flooring for Your Next Home Renovation

Photograph: dotshock (Shutterstock)

Magnetic flooring is attaining popularity as a flooring possibility for the reason that of its straightforward installation and very low risky natural compounds (VOC) output. And its glue-fewer attachment process makes it uncomplicated ample for a novice to tackle.

What is magnetic flooring?

Magnetic flooring will come as two layers: a magnetic underlayment that goes concerning the sub-floor and the flooring, and the flooring materials that has ferrous (iron-based) steel powder in it. Because the underlayment takes advantage of magnets to connect the flooring tiles, no glue or adhesive is necessary. Whilst magnets are acknowledged to injury some electronics, this kind of magnet isn’t sturdy ample to do any damage unless of course you’re functioning with exact scientific instruments.

The tools and resources you will need to have for installation

To put in magnetic flooring, you’ll need flooring and underlayment, some seam tape, a straight-edge, tape measure, and a utility blade. For some of the tile forms, like ceramic or wood, you will also need to have a saw that can minimize the flooring style you are applying and a square to mark your cuts.

Putting in your underlayment

Start off laying your flooring by earning confident that the sub-ground is no cost of particles or filth. Considering the fact that the underlayment demands to distribute out as flat as attainable to make very good make contact with with the tiles, minimizing the bumps underneath it will make it all the more simple to place jointly. Then, roll out the magnetic underlayment all in the identical direction. Here’s when the straight edge arrives in useful: Trim the underlayment to the edges of the floor and all around molding with your utility knife, using the straight edge as a manual then, use your seam tape to seal all of the seams between pieces of underlayment. This is critical to develop a dampness barrier, but also to maintain the underlayment from moving all-around though you are laying the ground.

Laying your new flooring

Then, all you have to have to do is lay the flooring on top of your underlayment. For carpet and vinyl tile, you can slice around walls and molding with a utility blade for other flooring types, you are going to want to use a skill noticed or tile saw. The hardest aspect will be setting up with a straight line to get a great in good shape. Choose a wall and start off laying the flooring horizontally in opposition to it from one corner out to give you a sound baseline to keep on your pattern from. Get the job done the pattern till you get to the opposite wall, and then go back again to do your custom cuts all around walls and moldings. (An edge of the magnetic attachment technique is that you really don’t have tongue-and-groove or simply click-with each other edges, so you can just area customized cuts in the openings where by they fit.)

The pros and drawbacks of magnetic flooring

The trade off with basic, safe magnetic flooring is that it’s typically far more expensive than other flooring sorts. On the other hand, the underlayment will very last for more than just one software, so it also lessens waste (and time, and some money) when you want to change your flooring all over again. So if you want a basic, speedy, and durable flooring variety and have the cash to shell out for it, magnetic flooring is a terrific alternative.